The instrument used to measure an altitude is an altimeter. It measures the height above mean sea level (MSL). An altimeter estimates these measurements with static air pressure.The altimeter calculates the amount based on changes in atmospheric pressure.
The measure is estimated based on a system, the air pressure and temperature as standard fixed-base. Altimeters are in line with the international standard atmosphere (ISA) is set. These international standards arebe used to calibrate the level of the altimeter, allowing the pilot to estimate the height.
The standard size is a starting point for calculating altitude.Due inaccurate at different temperatures around the world is an international standard for measuring altitude. Aircraft altimeters are equipped with an adjustable dial. Pilots can set your altimeter settings for the local air pressure so that the estimate is the precise height. Many airports around the world, local broadcastatmospheric settings over the air, so that drivers can adapt to circumstances.
It 'important to the sport of skydiving adventure, the altimeter is in compliance with local pressure.Variations atmospheric pressure can be adjusted in the estimation of influence of height, so it is important that an altimeter is set to ensure the jump local conditions.This done at the right height. With Adventure Skydiving free fall, with a maximum. Timing is crucial. Height measurements should be asaccurately as possible for added security.
Paratroopers are invited to share their personal altimeter is set to local weather conditions on the ground level.This make sure you have an accurate estimate of height during the jump. Altimeter settings are also important when it comes to air traffic control test this, is there an international standard altimeter useful.If some planes are flying with its settings adjusted to local conditions, while others use the ISA, there is a greaterRisk of local air pilots collision.Many use when flying at low altitude and ISA ISA International in higher elevations.
0 comments:
Post a Comment